Address：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
Categories
Silicon Steel
Hot Rolled Non-oriented Low Silicon Steel (Motor Steel)
The low silicon wafer contains less than 2.8 silicon and has a certain mechanical strength. It is mainly used to manufacture motors, commonly known as motor silicon steel sheets.
Hot Rolled High Silicon Steel (Transformer Steel)
High silicon silicon content of 2.8~4.8%, it is good magnetic, but more brittle, mainly used in the manufacture of transformer core, commonly known as transformer silicon steel sheet, commonly used in high silicon manufacturing large motor.
Cold Rolled Non-oriented Low Carbon Electrical Steel
Non-oriented electrical steel is mainly used as the iron core of large and medium-sized motors, generators, household motors and micro-motors, ballasts and small transformers. The main magnetic performance requirements of non-oriented electrical steel are low specific total loss and high magnetic polarization. The low specific total loss can save a lot of electric energy and extend the working time of the motor. High magnetic polarization means that the magnetization ability is strong, the excitation current of the iron core is reduced, and the specific total loss and iron loss are reduced.
Cold Rolled Non-oriented Silicon Steel Electrical Steel
The products are usually cold-rolled plates or strips with nominal thicknesses of 0.35 and 0.5mm, which are mainly used to manufacture motors and generators.
Cold Rolled Ordinary Oriented Silicon Steel
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in transformer (core) manufacturing industry. The most widely used oriented silicon steel is supplied in the form of a coil, and its surface is coated with an insulating layer to generate tensile stress in the base steel strip, thus further reducing the iron loss value. The cold-rolled strip has a smooth surface, good punching performance and high core filling factor.
Cold Rolled High Magnetic Induction Oriented Silicon Steel
High magnetic induction and low iron loss cold rolled oriented silicon steel sheet is an urgent product in power industry. The higher the magnetism of the silicon steel sheet, the electrical appliances manufactured are: less power loss, small size, light weight, long service life, and less cooling oil for the manufactured transformer. In particular, it can solve the problem that large electrical appliances such as transformers larger than 360000 KVA use lower magnetism. Difficulties of oriented silicon steel sheet manufacturing and transportation cannot pass through railway tunnels and highway bridges.
Cold Rolled Grain Oriented Silicon Steel Strip
Grain-oriented silicon steel strip, also known as cold-rolled silicon steel strip for telecommunications, is used in the manufacture of various power transformers, pulse transformers, magnetic amplifiers, converters and other cores with a working frequency of 400Hz or more.
Cold Rolled Non-oriented Silicon Steel Strip
Non-oriented silicon steel ribbons are widely used in the manufacture of high-frequency magnetic components such as various telecommunications and meters, such as the iron cores of magnetic devices such as power transformers and pulse transformers. With the development of science and technology, the device is required to have high performance and small volume, so the frequency of the device is becoming higher and higher. The higher the working frequency of the iron core, the thinner the silicon steel plate is required, and the ordinary non-oriented silicon steel sheet cannot meet the requirements.
Cold Rolled Non-oriented Silicon Steel For Magnetic Switch
Non-oriented silicon steel is used in rotating equipment such as motors. It is divided into iron core and rotor. In order to be easily magnetized during the rotation process, electrical energy is converted into mechanical energy. Therefore, it is required to be easily magnetized at every angle in the rotation process, so the grain orientation distribution in the non-oriented silicon steel is required to be uniform.
Cold Rolled Oriented Silicon Steel Strip
Non oriented silicon steel is used in rotating equipment such as motors, which are divided into iron cores and rotors. In order to be easily magnetized during the rotation process, electrical energy is converted into mechanical energy. Therefore, it is required that every angle during the rotation process be easily magnetized, so uniform grain orientation distribution is required in non oriented silicon steel.
CGO Conventional Electrical Steel M3/M4/M5/M6
We produce cold rolled grain oriented sheet (CRGO), also known as transformer sheet. They are made of 3% silicon steel. There are four grades of CRGO sheet: 0.23mm (M3), 0.27mm (M4), 0.30mm (M5), 0.35mm (M6).
Fully Machined Non-oriented Electrical Steel (FP)M12/M15/M19/M22
Non-oriented electrical steel is a kind of ferrosilicon soft magnetic alloy with low carbon content, which is an indispensable material in electric power, electronic and military industry. With the development of high-speed and miniaturization of motors, the performance requirements of non-oriented silicon steel are put forward higher requirements, such as low iron loss and high magnetic induction strength at high frequency.
Non-Oriented Electrical Steel Fully Processed (FP) M12/M15/M19/M22
Non oriented electrical steel is a silicon iron soft magnetic alloy with very low carbon content, and is an indispensable and important material in power, electronics, and military industries. With the development of high-speed and miniaturization of motors, higher requirements have been put forward for the performance of non oriented silicon steel, such as low iron loss and high magnetic induction strength at high frequencies.
CGO Grain Oriented Electrical Steel M3/M4/M5/M6
We produce cold rolled grain oriented plates (CRGO), also known as transformer plates. They are made of 3% silicon steel. There are four grades of CRGO sheets: 0.23mm (M3), 0.27mm (M4), 0.30mm (M5), and 0.35mm (M6).
23Q110/27Q120/30Q120/35Q135 CRGO Conventional
Electrical steel, usually referring to cold rolled electrical steel, can be divided intotwo major categories including grain oriented electrical steel and non-orientedelectrical steel. Grain oriented electrical steel, with its easy magnetizationdirection parallel to the rolling direction, has excellent magnetic properties in thisdirection including low core loss, high permeability and low magnetostriction andis widely used in the transformer industry. Further it can obtain lower core lossby domain refinement treatment. Meanwhile non-oriented electrical steel.featured by random distribution of grain orientation and magnetic isotropy, iswidely applicable to the motor industry.
18RK085/23RK075/27RK090/30RK105 CRGO Domamin Refined High Induction
Electrical steel, usually referring to cold rolled electrical steel, can be divided intotwo major categories including grain oriented electrical steel and non-orientedelectrical steel. Grain oriented electrical steel, with its easy magnetizationdirection parallel to the rolling direction, has excellent magnetic properties in thisdirection including low core loss, high permeability and low magnetostriction andis widely used in the transformer industry. Further it can obtain lower core lossby domain refinement treatment. Meanwhile non-oriented electrical steel.featured by random distribution of grain orientation and magnetic isotropy, iswidely applicable to the motor industry.
18QG085/20QG085/23QG095/27QG100/30QG120 CRGO High Induction
Electrical steel, usually referring to cold rolled electrical steel, can be divided intotwo major categories including grain oriented electrical steel and non-orientedelectrical steel. Grain oriented electrical steel, with its easy magnetizationdirection parallel to the rolling direction, has excellent magnetic properties in thisdirection including low core loss, high permeability and low magnetostriction andis widely used in the transformer industry. Further it can obtain lower core lossby domain refinement treatment. Meanwhile non-oriented electrical steel.featured by random distribution of grain orientation and magnetic isotropy, iswidely applicable to the motor industry.
50W1300/35W230/35W210 CRNGO Home Appliance
The demand for CRNGO steel in home appliances is driven by its efficiency in motor operation within air conditioners, refrigerators, etc. Preferred grades include 50W1300、50W1000、50W800、50W600、50W470、50W350、35W270、35W230、35W210, selected for their balance of performance and cost.
WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Tel：+86-13395104444
E-mail：info@jiuchuangsteel.com
Add：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
copyright © 2025 WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Business license