Address：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
Categories
Steel Rebar
HPB300/HRB335 Reinforcement Rebar
HPB300 grade: The yield strength of steel bars in this grade is 300MPa, with high plasticity and toughness, suitable for general structural reinforcement and stirrups. HRB335 grade: The yield strength of this grade of steel bars is 335MPa, with high strength and good ductility, suitable for general structural reinforcement and stirrups, especially for projects with high strength requirements.
HRB400/HRB400E Deformed Steel Rebar
HRB400 is a steel reinforcement material with high strength and good plasticity. HR stands for "hot rolling", which essentially refers to the heating and rolling process of steel bars in the production process. B represents that its yield strength is 400 megapascals (MPa) higher than that of ordinary carbon steel. HRB400 steel bars are mainly composed of alloys of carbon, sulfur, phosphorus, manganese and other elements, which have weather resistance, corrosion resistance and high tensile strength.
HRB500/HRB500E Deformed Steel Rebar
HRB500 steel reinforcement refers to a commonly used steel material in concrete structures, which has certain strength and toughness, and can effectively enhance the bearing capacity and tensile performance of concrete. Steel reinforcement plays an important role in construction.
HRB600 High Strength Hot Rolled Reinforced Bar
HRB600 steel bar is a new type of hot-rolled ribbed steel bar with high strength and good ductility. The use of HRB600 steel bar in engineering presents advantages such as saving steel bar usage and facilitating steel bar layout.
B500A grade steel is usually used for steel mesh products while B500B grade steel is used for steel bars. B500C steel is rarely required, and it is always worthwhile for structural engineers to check whether B500B grade steel can be used instead of B500C, because B500C usually has a significant cost overhead.
Epoxy resin coated steel bar is an epoxy resin protective coating prepared on the surface of ordinary steel bar by electrostatic spraying powder high temperature sintering process. The coating has excellent chemical corrosion resistance and does not react with acid and alkali. And the coating has anti-permeability, so it can delay the corrosion medium (such as water, oxygen, chloride, etc.) contact with the steel, so that its corrosion resistance life is greatly extended.
BS4449 Steel Reinforcement Rebar
BS4449 is yet another deformed steel bar standard. It is also differentiated as per European standards. When it comes to manufacturing, the steel bars falling in this standard are also hot rolled, which means that they are also used for general purposes, i.e. in common construction projects.
ASTM A615 Reinforcing Bar Grade 60
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.
ASTM A615 Concrete Rebar Grade 40
A615 grade 40 steel adds the most benefit when building materials must hold concrete in compression. Strength is one of the differentiators for these two rebar grades. The minimum tensile strength for A615 grade 40 steel is 70.05 ksi. It has a minimum yield strength of 40 ksi.
ASTM A615 Reinforcement Bar Grade 75
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.
TMT means Thermo Mechanical Treatment, which is a thermomechanical process; These TMT steel bars are generally used material in construction for enhanced protection against earthquake and another type of natural disasters. To ensure safety for your structure, TMT steel bars should be resistant to corrosion which helps to obtain a longer life to your structure.
Deformed bar, also known as rebar (short for reinforcing bar), is a steel bar or mesh of steel wires used as tension devices in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in tension. Deformed bar’s surface is often patterned to form a better bond with the concrete.
ASTM A615 Reinforcement Bar Grade 80
ASTM A615 is a deformed steel standard categorized under American standards. These are generally available in diameter between 9.5 mm and 43 mm, and length between 6 m and 12 m. Generally, the steel bars that fall under this standard are under deformed or plain carbon steel.
Galvanized reinforcing steel is bare reinforcing steel coated with a protective layer of zinc metal. The zinc coating serves as a barrier to corrosive elements that the rebar is exposed to when embedded in concrete.
WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Tel：+86-13395104444
E-mail：info@jiuchuangsteel.com
Add：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
copyright © 2025 WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Business license