Address：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
Product Description
Differential Thickness Tinplate Description
Tinplate, also known as tin-plated steel, is a thin steel plate plated with a layer of tin on both sides. The purpose of this coating is to provide corrosion protection and enhance the appearance of the steel. Differential coated tinplate is electrolytic tinplate, one surface of which carries a heavier coating than the other. This material is used principally for the manufacture of containers which require higher corrosion resistance inside than outside. In order to distinguish material having differential coatings, it is customary to mark one surface. Differential coatings may have economic advantages when the corrosive conditions to be encountered by the two surfaces differ in severity.
Product Parameters
|
Product Name |
Differential Thickness Tinplate |
|
Thickness |
0.18mm-0.50mm |
|
Width |
260mm-980mm |
|
Length |
Support customization |
|
Tin Coating |
General: 2.8g or 5.6g, can be produced according to your needs |
|
Substrate Type |
MR / SPCC / L / D |
|
Reference Standard |
GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203 |
Surface State of Tinplate
|
Surface State |
Features |
|
Light Surface |
Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
|
Stonetextured Surface |
Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
|
Silvercolor Surface |
Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull |
|
Mattless Surface |
The surface of the substrate is rough and dull, and the tin plating layer is not soft melting |
Substrate Type
|
Substrate Type |
Introduction |
|
MR |
The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
|
L |
Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
|
D |
Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
|
SPCC |
Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Coating Weight
|
Classification |
Representation of Tin Coating Weight |
Tin Plating Nominal Weight (g/m2) |
Minimum Average Tin Plating Weight (g/m2) |
|
Equal Tin Plating (E) |
1.1/1.1 |
1.1/1.1 |
1.8 |
|
2.2/2.2 |
2.2/2.2 |
4.0 |
|
|
2.8/2.8 |
2.8/2.8 |
5.0 |
|
|
5.6/5.6 |
5.6/5.6 |
10.5 |
|
|
Differentiated Tin Plating (D/A) |
2.2/1.1 |
2.2/1.1 |
2.0/0.9 |
|
2.8/1.1 |
2.8/1.1 |
2.25/0.9 |
|
|
5.6/1.1 |
5.6/1.1 |
5.05/0.9 |
|
|
2.8/2.2 |
2.8/2.2 |
2.25/2.0 |
|
|
5.6/2.2 |
5.6/2.2 |
5.05/2.0 |
|
|
5.6/2.8 |
5.6/2.8 |
5.05/2.25 |
Chemical Composition
|
No. |
C |
Si |
Mn |
S |
P |
Cu |
Ni |
Cr |
Mo |
|
D |
0.12 |
0.03 |
0.6 |
0.05 |
0.02 |
0.2 |
0.15 |
0.1 |
0.05 |
|
L |
0.13 |
0.03 |
0.6 |
0.05 |
0.15 |
0.03 |
0.04 |
0.06 |
0.05 |
|
MR |
0.13 |
0.03 |
0.6 |
0.05 |
0.2 |
0.2 |
0.2 |
0.1 |
0.05 |
Mechanical Properties & Applications
|
Standard Name |
Nominal Hardness HR30TS |
Strong Yield MPA |
Scope of Application |
|
T-1 |
49 |
230 /-50 |
Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
|
T-2 |
53 |
245 /-50 |
Ring and plug, dome, closure, shallow pull and special tank parts |
|
T-2.5 |
55 |
260 /-50 |
Battery cell, small can cover and body |
|
T-3 |
57 |
275 /-50 |
Cans and cans, large diameter caps, crown caps |
|
T-3.5 |
59 |
290 /-50 |
Can body, closure and crown lid |
|
T-4 |
61 |
340 /-50 |
Can body, closure and crown lid |
|
T-5 |
65 |
480 /-50 |
Cans and cans |
Ordering Notes
The ordering elements for tin plating generally include: standard grade (including steel grade code, annealing method and other information such as MR T-3 CA), size (the default order is thickness * width * length, tin plating amount ((different thickness plating) Tin needs to add A/D as the marking line mark, if not, no marking line will be marked), surface, order quantity, etc.
When ordering tin plating, please confirm with our sales staff the end use, such as canbody, ends, twist off caps, crown cork, EOE, etc., as well as the contents, special contents such as milk powder, high protein food, mushrooms, fruits, etc.;
Factory
Factory
Factory
Factory
Shipping
Shipping Photos
Shipping Photos
Shipping Photos
Faq
Are you a manufacturer?
We are a manufacturer and trader in one.
Can we visit the factory?
Customers are welcome to visit the factory.
How are the goods purchased shipped?
Export standard packaging.
What is the delivery time?
Depending on the quantity purchased, the usual delivery time is 7-12 days.
Do we have access to samples? What are the costs?
Samples are supported, depending on stock availability a sample fee is charged, if a sample fee is charged we will refund the sample fee when the customer orders the main goods.
How do we get a quote for a product?
Please send me the name, size, quantity and packaging requirements of the product you wish to order and we will then provide you with the most accurate and favourable price.
Keywords
Differential Thickness Tinplate
Contact Us
Classification
WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Tel：+86-13395104444
E-mail：info@jiuchuangsteel.com
Add：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
copyright © 2025 WUXI JIUCHUANG STAINLESS STEEL CO.LTD