Address：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
Categories
A179 seamless cold drawn low carbon steel pipe is equivalent to China's No. 10 high-quality low-carbon steel. A179 is suitable for cold-drawn high-quality low-carbon seamless steel pipes for heat exchangers and condensers.
A192 Seamless Carbon Steel Pipe
ASTM A192 is the same as ASME SA-192 and is the standard specification covering seamless carbon steel boiler and superheater tubes of minimum wall thickness for high pressure service.
A213 Seamless Carbon Steel Pipe
A213 is a ferrite and austenitic alloy seamless steel pipe for boilers, superheaters and heat exchangers. Its products should comply with TSG D7002 pressure piping component type test rules.
A252 Seamless&Welded Pipe Piles
ASTM A252 is the standard specification for nominal-wall cylindrical steel pipe piles, where the cylinder acts as a permanent load-bearing member or shell to form a cast-in-place concrete pile. The ASTM A252 specification has three grades: Grade 1, Grade 2, and Grade 3, of which Grade 2 and Grade 3 are commonly used materials.
A333 Seamless & Welded Steel Pipe
ASTM A333 is the standard specification for seamless and welded carbon and alloy steel pipe for low temperature applications or other applications requiring notch toughness. This standard covers several grades of ferritic steel: Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10 and Grade 11.
This standard applies to seamless steel tubes for general structural and mechanical structures. The main production of steel pipe grade includes Gr 10, Gr 20, Gr 35, Gr 45, Q345, 15CrMo, and 12Cr1MoV.
DIN 17175 is a standard specification for seamless tubes of heat-resistant steels used in elevated temperatures and high-pressure environments.
DIN 1629 seamless steel pipe has three main grades of St37.0, St44.0, St52.0. Generally, the DIN 1629 standard is not limited to the working pressure value, and the working temperature is limited to below 300 ℃.
EN 10219/S235 Welded Steel Pipe
EN10219 welded steel pipe is a round steel pipe that complies with European standards and its material is S235JR. This material has good plasticity and weldability, as well as good mechanical properties and corrosion resistance.
Spiral Submerged Arc Welded Pipe SSAW
The spiral submerged arc welded pipe is made of hot-rolled steel strip through constant temperature spiral forming and automatic submerged arc welding. The manufacturing process is to roll the steel strip, make the rolling direction at a certain angle to the center direction of the tube, and then form and weld, so the weld is spiral.
The longitudinal submerged arc welded pipe is made of steel plate as raw material, which is formed by a forming machine, and then double-sided submerged arc welding is carried out. Through this process, the LSAW pipe will have excellent ductility, toughness, uniformity, plasticity and good sealing performance.
Resistance welded pipe ERW is formed by hot rolled coil through forming machine. The skin effect and proximity effect of the high frequency current are used to heat and melt the edges of the tube blank.
Galvanized steel pipe, also known as galvanized pipe, is divided into two kinds of hot-dip galvanized pipe and Electro galvanized pipe. The hot-dip galvanized layer is thick, the coating is uniform, the adhesion is strong, and the service life is long.
A36 is a low-carbon steel containing manganese, phosphorus, sulfur, silicon and copper. A36 has good weldability and high yield strength. A36 carbon steel bar is commonly used as a variety of structural steel parts.
A572 steel bars have good strength, ductility and workability, making them ideal for structural applications. These characteristics make the A572 relatively simple to shape into different structures, while maintaining the ability to withstand large stresses and loads.
A105 is an ASTM specification for steel forgings, primarily for carbon steel forged pipe components. The type of carbon steel wrought alloy involved is a low carbon, manganese and silicon steel similar to the AISI 1330, but with a lower manganese content.
AISI 1018 carbon steel bar has a chemical composition of carbon, chromium, manganese, molybdenum, phosphorus, sulfur and silicon. AISI 1018 carbon steel is a free machining grade that is the most commonly available grade around the world.
AISI 1025 steel bar is a medium carbon steel that offers plasticity, workability and strength. The steel contains between 0.22% and 0.28% carbon, so it is stronger than low carbon steel and more workable and malleable than high carbon steel.
WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Tel：+86-18921168065
E-mail：info@jiuchuangsteel.com
Add：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
copyright © 2025 WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Business license