Address：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
Categories
Carbon Steel
Flanged shafts are used for torque transmission in the powertrain. On the one hand, they serve as a full floating axle shaft for driven rigid axles in commercial vehicles and, on the other hand, as a connection between the differential gear and the constant-velocity shaft in passenger cars. Process combinations are usually used to produce the flanged shafts. Firstly, the flange is generated by means of extrusion, then the shaft is elongated by swaging and, at the same time, the diameter is reduced. In this way, long undercuts are possible that would otherwise have to be produced by machining.
Sockets are versatile and indispensable tools used in various industries and applications. These cylindrical devices are designed to securely fit onto the head of a fastener, allowing for easy tightening or loosening of bolts, nuts, and screws. They come in a range of sizes, shapes, and configurations to accommodate different fastener types and sizes. Sockets are typically made from high-quality materials such as chrome vanadium steel or impact-resistant alloys to ensure durability and longevity.
Propeller Shaft - Marine Forgings
A propeller shaft, also called as drive shaft, is an important component in automotive and marine industries. Its primary motive is the transmission of torque and rotational power from the engine to the wheels or propeller. It allows vehicles and vessels to move efficiently and smoothly. The propeller shaft plays an indispensable role in converting the engine's power into kinetic energy, thereby, enabling the propeller to rotate at the required speed and move the vehicle forward.
Intermediate Shaft - Marine Forgings
Intermediate Shaft is used to connect thrust shaft and propeller shaft. It is made of stainless steel, forged steel or alloy steel. To ensure the quality of the product, we adopt the 100% ultrasonic flaw detection test in the production process. Our products are approved by ABS, BV, DNV, GL, LR, CCS, etc. We promise to offer the best products and first class service.
Rudder Stock - Marine Forgings
Rudder stock, also called rudder pintle, after Rudder Stock roughing, it will be conducted for the aging treatment, NDT Inspection and taper surface to scratch with. Rudder stock also known as rudder pulling rod,Rudder Stock is a part of rudder system. Rudder system include rudder blade, rudder stock, rudder pintle, carriers ,bearings and other accessories. It is a very important part of steering system. It make sure the vessel change direction.
This product is a piston rod used to open and close hutch in the marine vessel. Subject product is destined to be used on the sea, thus the product is given enough surface finishing having the strong corrosion resistance against salt damage and to satisfy the abrasion resistance as well. After the surface finishing, the rod is given integrated in-house machining and grinding in order to up-grade sliding ability.
The crosshead is a component that connects the piston and connecting rod, and has a guiding effect. A large number of compressors use connecting rod small ends.
PC Strand, or prestressed concrete steel strand, is a twisted steel cablecomposed of high strength steel wires and is stress-relieved(stabilized)for prestressed concrete or similar purposes.
Q195 is a carbon structural steel with a yield strength of 195MPA, which has the advantages of high plasticity, toughness, and welding performance. Usually applied in fields such as architecture, structure, and vehicles.
Q235 ordinary carbon structural steel, also known as A3 steel. Ordinary carbon structural steel - plain plate is a type of steel material. Q represents the yield limit of this material, followed by 235, which refers to the yield value of this material, around 235MPa. And as the thickness of the material increases, its yield value will decrease. Due to its moderate carbon content, good comprehensive performance, and a good combination of strength, plasticity, and welding performance, it is the most widely used.
Wear Resistant Steel Plate (NM Plate)
Wear Resistant Steel Plate (NM Plate) is a high-carbon alloy steel plate. This means that is harder due to the addition of carbon, and formable and weather resistant due to added alloys.
NM360 Wear Steel Plate (NM360 Plate)
NM360 steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc., and is also commonly used as a high-strength structural steel with yield strength ≥700MPa.
Wear Resistant Steel Plate (NM Plate) is a high-carbon alloy steel plate. This means that is harder due to the addition of carbon, and formable and weather resistant due to added alloys.
NM360 Steel Plate (NM360 Plate)
NM360 steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc., and is also commonly used as a high-strength structural steel with yield strength ≥700MPa.
NM360 steel plate is widely used in mining machinery, coal mining machinery, environmental protection machinery, engineering machinery, etc., and is also commonly used as a high-strength structural steel with yield strength ≥700MPa.
NM400 Steel Plate (NM400 Plate)
NM400 is a type of wear-resistant steel plate, with a Brinell hardness value of HB. The hardness value of NM400 is broad, ranging from 360 to 420.
NM450 Steel Plate (NM450 Plate)
NM450 is mainly used to provide protection in places or parts that require wear resistance, prolong equipment life, reduce maintenance and downtime caused by repairs, and correspondingly reduce capital investment.
NM500 Steel Plate (NM500 Plate)
NM500 is a high-strength wear-resistant steel plate with high wear resistance. Its Brinell hardness value of 500 (HBW) is mainly used to provide protection in situations or parts that require wear resistance, prolong equipment life, reduce maintenance and downtime, and correspondingly reduce capital investment.
WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Tel：+86-18921168065
E-mail：info@jiuchuangsteel.com
Add：10-1 Xipan Xiangyuan, Luoshe Town, Huishan District, Wuxi City
copyright © 2025 WUXI JIUCHUANG STAINLESS STEEL CO.LTD
Business license